Features
Gantry design for heavy duty : Ensuring both precision and reliability.
Two full sized saddles, running on longitudinal guide rails: Giving high precision and durability.
High speed positioning and contouring speed positioning speeds up to 18M/min.
The transverse guide rails : Extra wide of parallel guiderails and precision even with heavy duty torch suspension units.
Transverse energy feed chains : Giving efficient transportation of hoses and cables.
Gas distribution units : Central gas control system with solenoid valves for fuel gas, preheat oxygen, cutting oxygen.
Gas control console Gauges :
High / Low Pressure regular
Automatic hole piercing system
Gas control console near the operation panel and CNC controller : Providing a convenient operation
Plasma cutting with :
Precise initial height torch setting.
Integrated torch collision protection.
Automatic torch centering.
A.V.C height sensing control.
Specifications
MODEL | POWER 2500 |
POWER 3100 |
POWER 3700 |
POWER 4000 |
POWER 5000 |
POWER 6000 |
POWER 7000 |
POWER 8000 |
POWER 9000 |
Effective cutting width(mm) A | 2500 | 3100 | 3700 | 4000 | 5000 | 6000 | 7000 | 8000 | 9000 |
Rail Span (mm) B | 3500 | 4100 | 4800 | 5000 | 6000 | 7000 | 8000 | 9000 | 10000 |
Effective cutting length (mm) | 6500 + (X) | ||||||||
Rail length (mm) | 9000 + (X) | ||||||||
Cutting speed | 1~6000mm/min | ||||||||
Marking speed | 12000 mm/min | ||||||||
Rapid speed | 18000 mm/min | ||||||||
Cutting thickness | 3~300 mm | ||||||||
Two torches minimum distance | 155 mm | ||||||||
Hole piercing | 200mm (1 torch) | ||||||||
Gas supply | Oxygen and LPG or Acetylene | ||||||||
Power supply | 3 phases,220V,50/60HZ ,5KVA or on request | ||||||||
CNC Controller .Industrial PC Based NC controller : BURNY 10 Plus SHAPE-CUTTING CONTROL .Industrial Grade 15〞Touch Screen and Windows XP-based operation system .With Cycle Start, Cycle Stop, Go To, Reverse Industrial Grade Membrane panel controls .1 GB RAM, 80 GB hard drive and 1.44MB floppy drive, USB and RS232 / RS422 interface .50 pre-programmed commonly used standard shapes |